Loading...
Cuemark is the theatre cue-marking app: a script as a PDF, every cue placed on the word it fires on, and show mode to call it from — one line at a time with the next cue on deck. This connection lets a Stream Deck (or anything else Companion drives) take the cues and read what is on deck.
In Cuemark, open Settings ▸ Show control ▸ Companion and switch on Accept HTTP commands. Cuemark shows the port and the key; put both in this connection's settings. Cuemark has to be running on the machine named here (the default, 127.0.0.1, is the same machine Companion is on).
What is on deck, as text a button can show: the next cue as it is labelled, its number and the page it is on, the production, the page showing (as printed and in the file), and the counts — cues taken, cues left, cues in the show.
The cue that has just gone (lastCue, e.g. DCA 1) changes every time a
cue goes. A Companion trigger on that variable can run anything when a
particular cue goes. Simpler still: in Cuemark, give the cue a Companion
button in Edit cue and Cuemark presses that button itself when the cue goes.
For main and backup: whether this computer is the main, the backup or neither, and the link in words — MAIN · backup following, BACKUP · following, BACKUP · MAIN LOST.
Show mode running, line scroll on, booth dim on, and whether the cue on deck is a standby rather than a GO — so a button can go amber for a warning.
For main and backup: the main has gone quiet (on the backup — light your Take over button red), main and backup are linked, and this computer is the backup. Point the connection at the backup computer for these.
A ready-made button for every action above, in four groups, with the GO button reading the next cue off the variable. Under Main and backup: a button that shows the link and goes green when it is up and red when the main is lost, and a TAKE OVER button that lights red the moment the main goes quiet.