Loading...
Controls a Duonn Atrium 20 digital mixer over the network: mutes, faders, DCAs, input gain and the channel EQ. Button colours follow the console, so a change made on the console itself shows up on your buttons within about a second.
The status turns green once the console answers. If it stays red, check that the PC running Companion can reach the console (same network, same subnet).
| Action | What it does |
|---|---|
| Mute: channel, aux or main | Mute, unmute or toggle CH1–16, AUX1–8, Main L or Main R |
| Fader: set level | Set a channel or aux fader to a level in dB (-120 = -inf) |
| Fader: nudge up/down | Move a fader by a step in dB |
| DCA: on/off | Switch DCA1–4 on, off or toggle |
| DCA: set fader level | Set a DCA fader in dB |
| Input: set gain / nudge gain | Set or step the input gain of CH1–16 (dB) |
| EQ: on/bypass | Switch a channel's EQ on, to bypass, or toggle |
| EQ: high-pass filter | Switch the high-pass on at a frequency, on, off or toggle |
| EQ: low-pass frequency | Set the low-pass frequency (Hz) |
| EQ band: set frequency / gain / Q | Set one of the 4 EQ bands (setting the frequency also switches the band on) |
| EQ band: nudge gain | Step a band's gain in dB |
| EQ band: on/off | Switch one EQ band on, off or toggle |
| Input: rename channel | Write a name on the console's channel strip |
Number fields accept expressions, so a level can come from a variable.
Per channel: chN_mute, chN_fader, chN_gain, chN_eq, chN_hpf, chN_lpf, chN_bandB_freq, chN_bandB_gain, chN_bandB_q.
Also auxN_mute, auxN_fader, main_l_mute, main_r_mute, dcaN_on, dcaN_fader.
Ready-made buttons for every mute, every DCA, and a channel strip per input (fader ±1 dB, 0 dB, -inf, gain ±1 dB, EQ bypass, high-pass).