Loading...
VX61XL · V60 · VX60ASL · VX61ASL · VX61BASL · +8 more
Controls the VHD V60 family of PTZ cameras over VISCA-over-IP (TCP): VX61XL, V60, VX60ASL, VX61ASL, VX61BASL, VX751BA, VX752A, V60XL, V61XL, V63XL, V60XS, V61XS and V63XS.
The connection status is also available as the variable
$(<connection label>:connection_status), where the label is the name shown
in the Connections list (vx61xl by default).
This module is built from VHD's official "Command list EN VHD V60" VISCA table. Most commands match Sony's public VISCA specification, but this camera family uses its own encoding for some values:
It also includes commands documented for this family only, such as NR2D, AWB Sensitivity, Infrared Remote On/Off, DVI/HDMI output mode, Save Current Setting, Pan/Tilt Relative Position, Pan/Tilt Limit Clear, Voice Tracking and Sharpness Auto.
For the VHD VX-90, use the separate VHD VX-90 PTZ Camera module.
connected feedback is included, but there is no
per-parameter feedback.Check the connection's log in Companion: every command sent and every
reply received is logged as TX: / RX: hex at debug level.
Module built for AP Audiovisuele Producties. Report problems on the issue tracker.
VHD
Community