Loading...
Controls the VHD VX-90 PTZ camera over VISCA-over-IP (TCP).
This module is built directly from VHD's official VX-90 VISCA command
reference (VX90_VISCA_EN_20250729). Most commands are identical to
Sony's public VISCA specification (which is why the generic Bitfocus
"Sony VISCA" module already works for basic pan/tilt/zoom/focus/iris/gain
and presets on this camera).
A number of actions are marked [VHD-ext] in their name — these use
command bytes that are specific to VHD and are not part of Sony's
public VISCA spec (mostly under command category 0x0A/0x0B, one
under the unusual 0x2A). These will not work through a generic Sony
VISCA module; this module implements them directly.
[VHD-ext]
actions (ND filter, tally, tracking, motion sync, EIS, image style,
audio input, IR address, restart, factory reset) should be spot-checked
the first time you use them.connected feedback (green when the TCP connection is up)
is included, but there's no per-parameter feedback yet.Restart Camera and Factory Reset IP + Password actions do
exactly what they say — use with care, ideally behind a confirmation
step in your button setup.Module built by AP Audiovisuele Producties. Report problems or request features on the issue tracker. For questions about the underlying VISCA command set, see the VHD documentation or the technical contact at VHD.
VHD
Community