Loading...
Surface | Encoders | Where they are |
|---|---|---|
Stream Deck Studio | 2, each with a ring of 24 LEDs | One at each end of the key rows |
Stream Deck Plus | 4 | Under the touch strip |
Stream Deck Plus XL | 6 | Under the touch strip |
Galleon K100 SD | 2 | Above the keys |
Handler | Encoder | Left and Right |
|---|---|---|
What a turn does | Moves a number that Buttons keeps for the button, between a Min and a Max, and sends the new number to the actions | Runs the Left actions once per click to the left, and the Right actions once per click to the right |
What the action receives | The number, as Encoder Value or $(self.encoderValue) | Nothing: each action carries its own fixed step |
Typical actions | "Set" actions: set fader gain, set pan, set iris | "Adjust" or "Increment" actions: adjust fader gain by 1 dB, increment iris |
Use it when | Buttons is the only place the value is changed | The value can also change somewhere else: on the console, on the camera, or from another panel |
Setting | What it does |
|---|---|
Initial | The value the button starts at. |
Min, Max | The range. Turning past either end keeps the value at that end. |
Current | The value used when you run one of the button's actions from the editor. |
Assignment | Which encoder turns this button. See Which encoder turns which button. |
Display | How the LED ring shows the value on a Stream Deck Studio. See Show the value. |
Active Style | How the button looks while it holds an encoder. A Click Select button holds the encoders from a tap until it's released; a numbered or Location button holds its encoder all the time. Highlight (the default) draws an outline in the button's Encoder Color, white if none is set, on a claimed Click Select button. Ignore leaves the button unchanged. Value on white background replaces the button's design with the value in large text on white, with the button's text above it. |
$(self.encoderValue) in a calculation. Display | The ring shows | Good for |
|---|---|---|
Single | One lit LED at the value | Choosing from a list |
Start | A bar that grows from the low end | Levels: faders, gain, iris |
End | A bar that grows from the high end | Values that read downward, such as attenuation |
Split | A bar from the middle out to the value | Pan, balance, anything centred on zero |
$(self.encoderValue) in the button's text instead, such as $(self.encoderValue) dB on the second line, and leave Active Style on Highlight or Ignore. Use the button for surfaces without rings, and whenever the operator needs the number rather than a bar.-20, Min -60, Max 10, and Assignment to Location.$(self.encoderValue) dB on the second line of each button's text, so the strip shows the level above each knob.1.-1.0, Min -10, Max 10, and Display to Split.$(self.encoderValue) * 10.0.5, and Left with the same action and Value -0.5.0 and Max 20, Display set to Start, and Camera Control: Iris with Normalised on and the value $(self.encoderValue) / 20. That gives 21 steps from closed to open.$(self.encoderSelectorLabel) in the button's text to show the selected source, and use Single display for one LED per source: What you see | What to try |
|---|---|
Turning the encoder does nothing. | With Click Select, tap the button first to claim the encoders. Check that no numbered or Location button has that encoder: those win over Click Select. With Location, check that the button is in the encoder's own cell, such as the touch-strip segment above it. |
The level jumps when you start turning. | The value was changed somewhere else since the encoder last moved it. Buttons counts from its own value. Use Left and Right with an "Adjust" action instead. |
A red warning sign appears on the button after a turn. | The action failed. Run it from the editor with the lightning button next to it to see the error, such as an ATEM input that has no Stereo source. |
The value stops at the ends. | Expected: it stays between Min and Max. Widen the range, or scale it in the action. |
The ring shows only a single LED going round. | The range has more than 24 steps. Use fewer steps and scale them in the action. |
The device gets a value outside the range it expects. | Scale it in the action, such as $(self.encoderValue) / 20 for a 0–1 value. |
The encoder scrolls a section instead of turning the button. | No button holds that encoder. Tap a Click Select button, or give the button Location or a number. |
An Encoder Selector sweeps the program bus through every source. | Expected: each click runs the action. Use the selector on a monitor or preview output, not on program. |
Was this helpful?
0 of 0 users found this page helpful